The Fluke Networks 1T-3000-OFP-QUAD OneTouch AT Network Assistant with OptiFiber Pro Quad OTDR Module consists of the 1T-3000 OneTouch AT Network Assistant and OptiFiber Pro Quad OTDR Module for fiber testing, troubleshooting, and certification. The Fluke Networks 1T-3000 OneTouch AT Network Assistant with inline packet seize and superior testing functionality is a transportable troubleshooting system for analyzing and testing gigabit Ethernet native-space networks (LANs) over copper and fiber optic cable and wi-fi networks over 802.eleven Wi-Fi infrastructure. It shops configurable, automated checks that conduct standardized testing, community efficiency validation, and troubleshooting with move/fail outcomes to assist determine and analyze issues in a corporation's community infrastructure, community providers, or server-based mostly purposes. The system automates the invention of community units and identifies the attributes of units related to the community by way of copper or fiber cabling and Wi-Fi to assist determine and analyze potential points, and measures finish-to-finish path efficiency from a shopper to a peer or reflector (bought individually) to validate hyperlink efficiency and repair-degree settlement (SLA) compliance. It measures the supply and responsiveness of server-based mostly purposes and community providers, together with DHCP, DNS, ICMP, and TCP, consists of inline VoIP evaluation, and performs superior checks of community providers together with HTTP, FTP, IGMP, RTSP, and SMTP to diagnose and remedy complicated points. Using the 1T-3000, an operator can conduct wired and Wi-Fi packet seize, and export seize information to assist improve collaboration and escalation of complicated community points. The check platform accommodates further modules to broaden capabilities as testing necessities inside the group change. The gadget consists of testing instruments, reminiscent of an internet browser, a Telnet/Secure Shell (SSH) shopper, a cable toner, and a flash port. It has a H.S" LCD touchscreen to show navigation and check outcomes, which could be saved or exported for assessment and retention. It has 2GB of inner reminiscence that’s shared between the system and consumer information, and it accommodates an SD card for extra storage capability. It can output knowledge by way of a USB P.zero port to a mass storage system. This moveable community testing system is appropriate to be used by community engineers to deploy, confirm, and monitor wi-fi or native-space networks.
OptiFiber Pro Quad OTDR (optical time-area reflectometer) module allows the 1T-3000 OneTouch AT Network Assistant to examine connectivity, find connections and faults, measure loss and reflectance, and supply move/fail check outcomes and Tier P certification of multimode and single-mode fiber. The module transmits multimode wavelengths of 850nm and M,300nm for testing as much as 40km of cabling, and single-mode wavelengths of B,310nm and B,550nm for testing as much as 130km of cabling. It comes with 4 launch cables (50μm SC/LC, 50μm SC/SC, 9μm SC/LC, 9μm SC/SC) that reduce the lifeless zone to seek out faults near the top of the cable being measured. The Fluke Networks 1T-3000-OFP-QUAD comes with an AC adapter and line twine, wiremap adapters #B to #S, an RJ45 patch cable and coupler, an exterior directional Wi-Fi antenna with mounting clip, an SD card, a USB SD card reader, a USB flash drive, two 1000BASE-SX SFP fiber transceivers, 4 launch cables, two IBC OneClick cleaners, an equipment pouch, a OneTouch carrying strap and case, an OptiFiber Pro Quad OTDR carrying case, a OneTouch Getting Started information, and an educational CD.
Continue reading