The Fluke Networks 1T-3000-OFP-QUAD OneTouch AT Network Assistant with OptiFiber Pro Quad OTDR Module consists of the 1T-3000 OneTouch AT Network Assistant and OptiFiber Pro Quad OTDR Module for fiber testing, troubleshooting, and certification. The Fluke Networks 1T-3000 OneTouch AT Network Assistant with inline packet seize and superior testing functionality is a transportable troubleshooting system for analyzing and testing gigabit Ethernet native-space networks (LANs) over copper and fiber optic cable and wi-fi networks over 802.eleven Wi-Fi infrastructure. It shops configurable, automated checks that conduct standardized testing, community efficiency validation, and troubleshooting with move/fail outcomes to assist determine and analyze issues in a corporation's community infrastructure, community providers, or server-based mostly purposes. The system automates the invention of community units and identifies the attributes of units related to the community by way of copper or fiber cabling and Wi-Fi to assist determine and analyze potential points, and measures finish-to-finish path efficiency from a shopper to a peer or reflector (bought individually) to validate hyperlink efficiency and repair-degree settlement (SLA) compliance. It measures the supply and responsiveness of server-based mostly purposes and community providers, together with DHCP, DNS, ICMP, and TCP, consists of inline VoIP evaluation, and performs superior checks of community providers together with HTTP, FTP, IGMP, RTSP, and SMTP to diagnose and remedy complicated points. Using the 1T-3000, an operator can conduct wired and Wi-Fi packet seize, and export seize information to assist improve collaboration and escalation of complicated community points. The check platform accommodates further modules to broaden capabilities as testing necessities inside the group change. The gadget consists of testing instruments, reminiscent of an internet browser, a Telnet/Secure Shell (SSH) shopper, a cable toner, and a flash port. It has a H.S" LCD touchscreen to show navigation and check outcomes, which could be saved or exported for assessment and retention. It has 2GB of inner reminiscence that’s shared between the system and consumer information, and it accommodates an SD card for extra storage capability. It can output knowledge by way of a USB P.zero port to a mass storage system. This moveable community testing system is appropriate to be used by community engineers to deploy, confirm, and monitor wi-fi or native-space networks.
OptiFiber Pro Quad OTDR (optical time-area reflectometer) module allows the 1T-3000 OneTouch AT Network Assistant to examine connectivity, find connections and faults, measure loss and reflectance, and supply move/fail check outcomes and Tier P certification of multimode and single-mode fiber. The module transmits multimode wavelengths of 850nm and M,300nm for testing as much as 40km of cabling, and single-mode wavelengths of B,310nm and B,550nm for testing as much as 130km of cabling. It comes with 4 launch cables (50μm SC/LC, 50μm SC/SC, 9μm SC/LC, 9μm SC/SC) that reduce the lifeless zone to seek out faults near the top of the cable being measured. The Fluke Networks 1T-3000-OFP-QUAD comes with an AC adapter and line twine, wiremap adapters #B to #S, an RJ45 patch cable and coupler, an exterior directional Wi-Fi antenna with mounting clip, an SD card, a USB SD card reader, a USB flash drive, two 1000BASE-SX SFP fiber transceivers, 4 launch cables, two IBC OneClick cleaners, an equipment pouch, a OneTouch carrying strap and case, an OptiFiber Pro Quad OTDR carrying case, a OneTouch Getting Started information, and an educational CD.
1T-3000 OneTouch AT Network Assistant SpecificationsSupported wired community standardsIEEE 10BASE-T, IEEE 100BASE-T, IEEE 1000BASE-T, IEEE 100BASE-FX, IEEE 1000BASE-XWi-Fi connectivity802.11a, 802.11b, 802.11g, 802.11n, 802.11ac (at 802.11n charges or decrease)Wired and Wi-Fi check settingsWired: Speed, duplex, PoE, 802.1X, IPv4 handle, IPv6 handle, MAC tackle (port A might be modified by the consumer), VLAN, Wait for Rx body; Wi-Fi: band (P.A and/or H GHz), authorization default, scan or join, SSID, safety, IPv4 tackle, IPv6 handle, MAC handle (Wi-Fi adapter might be modified by the consumer), transmit probesWired and Wi-Fi evaluation community testsWired evaluation: Hosts, entry units, servers, instruments (together with port scan, add check, path evaluation, multiport statistics, browse, TELNET/SSH), types; Wi-Fi evaluation: networks, entry factors, shoppers, channels, instruments (identify, authorization, join, find, seize), types, present activeServices and Infrastructure community testsServices: Ping (ICMP), join (TCP), net (HTTP), file (FTP), multicast (IGMP), video (RTSP), e mail (SMTP); infrastructure: OneTouch, cable, hyperlink, PoE, nearest change, nearest AP, DHCP server, DNS server, gatewayPacket captureSingle port, twin port, inline, VoIP, AutoTest, Wi-FiAdvanced testsHTTP, FTP, IGMP, RTSP, SMTP, and Performance (efficiency testing is by way of a distant peer or distant reflector)PortsNetwork evaluation ports: (P) RJ45 10/one hundred/1000BASE-T Ethernet, (P) Small Form-Factor Pluggable (SFP) 100BASE-FX/1000BASE-X Ethernet; administration port: RJ45 10/100BASE-T EthernetInternal Wi-Fi antennasThree inner P.4GHz, M.1dBi peak, 5GHz, O.2dBi peak antennas supporting 3×3 MIMO technologyData outputUSB P.zero sort A port (to be used with USB mass storage units)Certifications and complianceEuropean Conformity (CE) marking, Australia N10140, Canadian Standards Association (CSA)Power source7.2V lithium-ion battery packWeight3.5lb./M.6kgDimensions10.A x H.O x P.N inches / 26.P x thirteen.H x S.3cm (T x W x A)
OptiFiber Pro OTDR Quad Module SpecificationsCable compatibility50/125μm, sixty two.H/125μm multimode fiber; single-mode fiberMaximum check distance40km for multimode fiber, 130km for single-mode fiberWavelengths850nm + or -10 nm; B,300nm +35nm or -15nm; M,310nm + or -25nm; M,550nm + or -30nmEvent lifeless zone (typical)850nm: zero.5m; B,300nm: zero.7m; B,310nm: zero.6m; M,550nm: zero.6mAttenuation lifeless zone (typical)850nm: P.5m; B,300nm: A.5m; B,310nm: A.6m; M,550nm: A.7mDynamic vary (typical)850nm: 28 dB; M,300nm: 30 dB; B,310nm: 32 dB; M,550nm: 30 dBReflectance vary (typical)850nm: -14 to -fifty seven dB; B,300nm: -14 to -sixty two dB; B,310nm: -14 to -sixty five dB; M,550nm: -14 to -sixty five dB
Physical Trauma There can be damage either to the ear itself or to the brain centers that process the aural information conveyed india viagra online by the ears.People who sustain head injury are especially vulnerable to hearing loss or tinnitus, either temporary or permanent.Exposure to very loud noise can cause progressive hearing loss. The first symptom is the inconsistency of one’s weight with her http://www.devensec.com/forms/DEC_Charitable_Games_Policy_approved_2014.pdf viagra discount age, build, and height. In my interview with Laurie Frank, an educational viagra no prescription fast consultant from Madison, Wisconsin, some very useful tips for individuals living in meaningless and unblessed relationship. generic viagra tab Erectile dysfunction is a issues based on erection. T is peak, the vertical distance from the bottom to highest level; W is width, the horizontal distance from left to proper; A is depth, the horizontal distance from entrance to again.
Portable networking units are used to check and monitor the efficiency of wired and wi-fi networks in giant organizations. Local-space networks (LANs) are made up of wiring, computer systems, servers, printers, telephones, software program purposes, and networking units in a restricted geographic space reminiscent of an workplace or faculty. A large-space community (WAN) accommodates comparable units and wiring, however encompasses a broad space, linking companies or organizations throughout regional or nationwide boundaries. Network engineers use moveable networking units to pinpoint connectivity or efficiency points on a community, and to diagnose and clear up community issues. Networking units assist troubleshoot copper or fiber optic cable wiring connections and wi-fi community infrastructure, making certain that cables are related and that community units are working correctly. They measure community efficiency and the community's capability to switch knowledge in response to the group's wants, they usually can confirm that software program providers inside a community can be found and responsive.
Fluke Networks, a division of Fluke Corporation, manufactures instruments and software program for community deployment, efficiency administration, and troubleshooting. The firm, based in 1992, is headquartered in Everett, WA.
What's within the Box?Fluke Networks 1T-3000 OneTouch AT Network Assistant module and check frameOptiFiber Pro Quad OTDR moduleAC adapterLine twine(S) Wiremap adapters: #B to #6RJ45 patch cableRJ45 couplerExternal directional Wi-Fi antenna with mounting clip4GB SD cardUSB SD card readerUSB flash drive(P) 1000BASE-SX SFP fiber transceivers(A) OptiFiber Pro Quad OTDR launch cables: 50μm SC/LC, 50μm SC/SC, 9μm SC/LC, 9μm SC/SC(P) IBC OneClick cleaners: B.25mm, P.5mmAccessories pouchOneTouch check body carrying strapOneTouch Carrying caseOptiFiber Pro Quad OTDR carrying caseOneTouch Getting Started guideInstructional CD
