The Fowler fifty four-245 collection digital indicating micrometer has a flat anvil/spindle pair, a selection of measuring vary, an LCD with an inch/metric switchable decision, and is designed to be used as a comparator or Go/No Go (Go/NG) gauge for evaluating elements with tight tolerances. A switchable decision of zero.0005", zero.00005", zero.01mm, and zero.001mm readings offers exact readings. A measuring pressure of A.H to 6N and a repeatability of zero.00005"/1μm supplies repeatable measurements between operators. Carbide-tipped measuring faces present put on resistance. The non-rotating spindle ensures workpieces are safe when measuring. After setting, a spindle locking screw holds the spindle in place whereas the anvil retracts zero.275" for fast launch and placement of workpieces. The setting desk may be adjusted to the specified peak and a setting screw locks the peak in place for constant placement of workpieces.

The LCD data minimal, most, and complete indicator studying (TIR), has a maintain function that saves the studying for recording, and might be set to zero at any spindle location. Two measuring references may be individually preset to operator preferences. Settable tolerance limits permits the operator to view at a look whether or not or not workpieces fall inside acceptable limits. Bidirectional RS-232C output transfers knowledge to a pc (cable not included). The micrometer requires a CR2032 battery (included), and features a fitted case. Micrometers P" and above embrace a normal.
SpecificationsDisplay typeLCDAnvil/spindle styleFlatMeasuring rangeVariesResolution0.0005", zero.00005", zero.01mm, zero.001mmRepeatability0.00005"/1μmMeasuring force4.H to 6NAnvil retraction0.275" (7mm)Data outputRS-232PowerCR2032 battery
Continue reading →