Fluke Networks LRAT2-CIQ-GSV Linkrunner AT 2000/CableIQ Gigabit Service Kit

Rating: 
Amazon Price: N/A (as of May 17, 2017 10:36 am – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on the Amazon site at the time of purchase will apply to the purchase of this product.

The Fluke Networks LRAT2-CIQ-GSV LinkRunner AT 2000/CableIQ Gigabit Service Kit consists of the LinkRunner AT 2000 Network Auto-tester, the CableIQ qualification tester, and the IntelliTone Pro 200 probe. The LinkRunner AT 2000 Network Auto-tester is a transportable troubleshooting gadget for analyzing and testing Ethernet networks over copper and fiber optic cable infrastructure. It shops and performs automated connectivity exams to assist determine and analyze community issues. The gadget analyzes copper or fiber cabling infrastructure, verifies connections at 10M/100M/1G, validates energy over Ethernet (PoE) efficiency, and discovers VLAN ports and switches to assist determine potential points. It measures the supply and responsiveness of community providers, together with DHCP and DNS, to diagnose and remedy complicated points. It helps each IPv4 and IPv6 addressing for compatibility with location and identification protocols, and offers 802.1x authentication to confirm entry to safe networks. In packet reflector mode it may be used as a distant system throughout throughput checks to validate LAN and WAN throughput capabilities. The LinkRunner AT 2000 has a P.H" LCD display to show check outcomes, and a 12-key elastomeric keypad for navigation. LinkRunner Manager software program is included with the system, and allows the operator to generate and save as much as 50 reviews, handle LinkRunner AT profiles, and improve the LinkRunner AT firmware. The software program is suitable with Microsoft Windows XP, Microsoft Windows Vista, and Microsoft Windows S. This moveable community testing gadget is appropriate to be used by community technicians to confirm community connectivity in native-space networks corresponding to workplace buildings or faculties.

The Fluke Networks CableIQ Qualification Tester qualifies transmission capabilities of voice, 10/one hundred/one thousand Ethernet, VoIP, or CATV on copper cabling, together with twisted-pair, 75Ω coax, and audio cabling. The autotest perform qualifies cabling in lower than A seconds. The meter identifies wiremap faults, bridge faucets, and port traits; detects and shows the power of RF coaxial tv alerts; and routinely studies whether or not the cable is related to a tool. A wiremap perform helps as much as seven distinctive ID numbers and may be carried out to confirm that cables are put in appropriately. The MultiMap perform exams a number of segments by way of bridge faucets to detect faults on particular person conductors. The tester detects and locates crosstalk faults on twisted-pair cabling and impedance faults on twisted-pair and coaxial cabling. The continuity toner checks safety switches at door and home windows and the speaker check verifies speaker connections. The tester blinks the port mild on a hub or change to confirm connectivity and cable routing. The constructed-in toner perform works with normal analog probes to find and isolate cables behind partitions, at patch panels, or in bundles. The IntelliTone perform works with elective Fluke Networks ITK100 and ITK200 probes. The meter shops as much as 250 units of check outcomes. An autosave perform ensures that check outcomes are captured and saved. Results may be downloaded to a pc for lengthy-time period data retention, or imported to the CableIQ Reporter software program for evaluation and era of certification stories to offer proof that the set up has been accomplished in accordance with requirements and greatest practices (software program and USB cable included). Copper and fiber testers are utilized by community technicians to troubleshoot, keep, and optimize efficiency of copper and fiber optic cabling, hardware connections, and community settings in enterprise networks.

The IntelliTone Pro 200 probe detects IntelliTone digital alerts, rejecting noise and false alerts, to find and hint knowledge cabling on lively networks. It detects 500 to M,200 Hz analog alerts to isolate particular person wire pairs and hint voice, audio, and video cabling on non-lively networks. The probe detects alerts at cable racks, in patch panels, and even behind partitions, and identifies detected alerts audibly and with eight LEDs that mild successively because the sign power will increase for immediate isolation of a single cable inside a bundle. A sync LED exhibits battery power at energy-up and confirms reception of IntelliTone alerts, and the cable map perform permits the probe to validate the cable map on RJ11 and RJ45 connectors, testing continuity and discovering shorts, opens, and crossed-pair wiring faults on all 4 pairs of UTP and STP twisted pair cabling. RJ11 and RJ45 jacks plug right into a port on the underside of the probe. The probe turns off mechanically after one hour of inactivity. The package comes with wiremap adapter #M, an RJ45 coupler, a USB cable, an AC adapter, a chargeable Li-ion battery pack, LinkRunner Manager software program CD, a LinkRunner smooth case, CableIQ Remote Identifiers #M to #S, a carrying case, and directions.

LinkRunner AT 2000 SpecificationsCopper media accessRJ45: 10BASE-T, 100BASE-TX, 1000BASE-T, and PoE (IEEE 802.3af and 802.3at); 100BASE FX and 1000Fiber media accessSFP adapter port helps 100BASE-FX and 1000BASE-LX/ SX/ZXCable testsPair lengths, opens, shorts, splits, crossed, straight by way of, and cable IDNetwork providers testsDHCP, DNS, TCP, ICMPPorts(M) RJ45 10/one hundred/1000BASE-T Ethernet, (B) Small Form-Factor Pluggable (SFP) 100BASE-FX/1000BASE-X EthernetReportsUp to 50Display2.H" colour LCD (320 x 240 pixels)Keypad12-key elastomericData outputUSB H-pin mini-BCertifications and complianceEuropean Conformity (CE) marking, Australia N10140, Canadian Standards Association (CSA)Power sourceRechargeable lithium-ion battery packWeight18oz./zero.5kgDimensions7.H x A.H x B.N inches / 19.H x H.N x A.8cm (T x W x A)

CableIQ Qualification Tester SpecificationsQualification auto-tests1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap solely, CoaxTest connectorsShielded H-pin modular jack accepts H-pin modular (RJ45) and A-pin modular (RJ11) plugs; and E-connector for coaxial cableSupported testsWiremap, size, cable sign efficiency, digital toner, analog toner, Ethernet port detection and identification, analog phone detection, blink port mild, continuity, speaker check, cable fault discovering, and video sign detectionLength testUp to one thousand'/300mWiremapDetect single-wire faults and helps MultiMap mode with as much as seven distant workplace identifiers; attracts proportional wire size to breaks; and detects cut up pairsTone generatorGenerates digital tones suitable with Fluke Networks IntelliTone probe and 4 tones suitable with typical analog probes (all pairs, frequency B-P kHz)Find faultMeasures crosstalk and impedance and compares towards applicable limits based mostly on qualification check chosen. Detects location of huge level sources in addition to distributed sources within the cabling if they’re enough to disqualify the appliance.Results storageUp to 250 qualification check resultsComputer interface for knowledge exportUSB port (H-pin mini-B)Power sourceFour AA alkaline batteries (included)Weight1.2lb./zero.55kgDimensions7 x A.H x M.seventy five inches/17.H x H.N x A.5cm (T x W x A)

IntelliTone Pro 200 Probe SpecificationsDigital tone detectionIntelliTone alerts from Fluke Networks devicesAnalog tone detection500 to B,200Hz alerts (consists of SmartTone alerts and alerts from different analog tone turbines)Cabling applicationsCopper cabling similar to seventy five or 50Ω coaxial cable together with RG6, RG59, and others for CATV/CCTV; two-conductor management, safety, and generic cable; Category 5e and Category S cable for 10 Base-T and 10/one hundred Base-T Ethernet networks; POTS telecom service and UTP (unshielded twisted pair) cable together with Category O phone cable; STP (shielded twisted pair) cableDisplay(H) LED sign power indicators, (B) LED sync indicator (confirms reception of IntelliTone sign)AudioIntelliTone: microprocessor managed audio information
Analog: detected tone generator signalInterfaceMain Mod8 port for cable mapAgency certifications and requirements metEuropean Conformity (CE) marking; Australia N10140 H-Tick EMC standardPower source9V alkaline battery (included)Dimensions22.P x A.H x O.2cm/H.seventy three x B.88 x M.26 inches (T x W x A)Weight (with battery)133g/A.S oz.

T is peak, the vertical distance from the bottom to highest level; W is width, the horizontal distance from left to proper; A is depth, the horizontal distance from entrance to again.

Portable networking units are used to check and monitor the efficiency of wired and wi-fi networks in giant organizations. Local-space networks (LANs) are made up of wiring, computer systems, servers, printers, telephones, software program purposes, and networking units in a restricted geographic space resembling an workplace or faculty. A extensive-space community (WAN) incorporates comparable units and wiring, however encompasses a broad space, linking companies or organizations throughout regional or nationwide boundaries. Network engineers use moveable networking units to pinpoint connectivity or efficiency points on a community, and to diagnose and remedy community issues. Networking units assist troubleshoot copper or fiber optic cable wiring connections and wi-fi community infrastructure, making certain that cables are related and that community units are working correctly. They measure community efficiency and the community's means to switch knowledge in accordance with the group's wants, they usually can confirm that software program providers inside a community can be found and responsive.

Fluke Networks, a division of Fluke Corporation, manufactures instruments and software program for community deployment, efficiency administration, and troubleshooting. The firm, based in 1992, is headquartered in Everett, WA.

What's within the Box?LinkRunner AT 2000 Network Auto-testerCableIQ qualification testerIntelliTone Pro 200 probeWiremap adapter #B(S) CableIQ distant identifiers: #M to #7RJ45 couplerUSB cableAC adapterRechargeable lithium-ion battery packLinkRunner Manager software program CDLinkRunner gentle caseCarrying caseLinkRunner Getting Started guideIntelliTone Pro Getting Started guideCableIQ User Manual

Product Details

  • Item Weight: 12 pounds
  • Shipping Weight: 12 pounds
  • Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
  • ASIN: B00C2RAW66
  • Item model number: LRAT2-CIQ-GSV
Be Sociable, Share The Wealth!

    Fluke Networks LRAT2-CIQ-GSV Linkrunner AT 2000/CableIQ Gigabit Service Kit
    Fluke Networks LRAT2-CIQ-GSV Linkrunner AT 2000/CableIQ Gigabit Service Kit
    Fluke Networks LRAT2-CIQ-GSV Linkrunner AT 2000/CableIQ Gigabit Service Kit
    Fluke Networks LRAT2-CIQ-GSV Linkrunner AT 2000/CableIQ Gigabit Service Kit

    Fluke Networks LRAT2-CIQ-GSV Linkrunner AT 2000/CableIQ Gigabit Service Kit

    Fluke Networks LRAT2-CIQ-GSV Linkrunner AT 2000/CableIQ Gigabit Service Kit