Fluke Networks CIQ-VOIP CableIQ VoIP Enterprise Service Kit for CableIQ Qualification Tester, S” L x A.H” W x B.seventy five” A

Fluke Networks CIQ-VOIP CableIQ VoIP Enterprise Service Kit For CableIQ Qualification Tester, 7" L X 3.5" W X 1.75" D

The Fluke Networks CIQ-VOIP CableIQ Enterprise Service Kit with CableIQ qualification tester, NetTools Series II community tester, and IntelliTone Pro 200 probe qualifies present cabling for help of voice, 10/one hundred, VoIP, and gigabit Ethernet providers. The CableIQ qualification tester checks the transmission capabilities of voice, 10/one hundred/one thousand Ethernet, VoIP, or CATV on copper cabling, together with twisted-pair, 75Ω coax, and audio cabling. Its autotest perform qualifies cabling in lower than A seconds. The meter identifies wiremap faults, bridge faucets, and port traits; detects and shows the power of RF coaxial tv alerts; and mechanically reviews whether or not the cable is related to a tool. A wiremap perform helps as much as seven distinctive ID numbers and could be carried out to confirm that cables are put in appropriately. The MultiMap perform exams a number of segments by way of bridge faucets to detect faults on particular person conductors. The tester detects and locates crosstalk faults on twisted-pair cabling and impedance faults on twisted-pair and coaxial cabling. The continuity toner checks safety switches at door and home windows and the speaker check verifies speaker connections. The port mild on a hub or change blinks to confirm connectivity and cable routing. The constructed-in toner perform works with commonplace analog probes to find and isolate cables behind partitions, at patch panels, or in bundles. The IntelliTone perform works with optionally available Fluke Networks ITK100 and ITK200 probes. The meter shops as much as 250 units of check outcomes. An autosave perform ensures that check outcomes are captured and saved. Results may be downloaded to a pc for lengthy-time period data retention, or imported to the CableIQ Reporter software program for evaluation and era of certification studies to offer proof that the set up has been accomplished in accordance with requirements and greatest practices (software program and USB cable included). Copper and fiber testers are utilized by community technicians to troubleshoot, keep, and optimize efficiency of copper and fiber optic cabling, hardware connections, and community settings in enterprise networks.

The NetTool Series II inline VoIP community tester isolates and diagnoses community system and software connectivity points, troubleshoots gigabit-to-the-desk deployments with twin 10, one hundred, and one thousand Mbps Ethernet interfaces. The tester detects and flags sudden ports and community visitors to determine suspicious exercise brought on by spy ware, malware, and viruses. Power-over-Ethernet (PoE) measures present and voltage and shows pair info both in-line or single-ended. The VoIP performance screens IP telephone boot-up and VoIP conversations, and measures key name high quality metrics together with jitter and dropped packets. The tester qualifies hyperlinks for VoIP throughout pre-deployment assessments. Wiremap performance verifies that cables are put in appropriately and shows distance to faults. The meter is powered by 4 AA alkaline batteries (included).

The IntelliTone Pro 200 probe detects IntelliTone digital alerts, rejecting noise and false alerts, to find and hint knowledge cabling on lively networks. It detects 500 to M,200 Hz analog alerts to isolate particular person wire pairs and hint voice, audio, and video cabling on non-lively networks. The probe detects alerts at cable racks, in patch panels, and even behind partitions, and identifies detected alerts audibly and with eight LEDs that mild successively because the sign power will increase for immediate isolation of a single cable inside a bundle. A sync LED exhibits battery power at energy-up and confirms reception of IntelliTone alerts, and the cable map perform permits the probe to validate the cable map on RJ11 and RJ45 connectors, testing continuity and discovering shorts, opens, and crossed-pair wiring faults on all 4 pairs of UTP and STP twisted pair cabling. RJ11 and RJ45 jacks plug right into a port on the underside of the probe. The probe turns off mechanically after one hour of inactivity.

Cable IQ SpecificationsQualification auto-tests1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap solely, CoaxTest connectorsShielded H-pin modular jack accepts H-pin modular (RJ45) and A-pin modular (RJ11) plugs; and E-connector for coaxial cableSupported testsWiremap, size, cable sign efficiency, digital toner, analog toner, Ethernet port detection and identification, analog phone detection, blink port mild, continuity, speaker check, cable fault discovering, and video sign detectionLength testUp to one thousand'/300mWiremapDetect single-wire faults and helps MultiMap mode with as much as seven distant workplace identifiers; attracts proportional wire size to breaks; and detects cut up pairsTone generatorGenerates digital tones suitable with Fluke Networks IntelliTone probe and 4 tones suitable with typical analog probes (all pairs, frequency M-P kHz)Find faultMeasures crosstalk and impedance and compares towards applicable limits based mostly on qualification check chosen. Detects location of huge level sources in addition to distributed sources within the cabling if they’re adequate to disqualify the appliance.Results storageUp to 250 qualification check resultsComputer interface for knowledge exportUSB port (H-pin mini-C)Power sourceFour AA alkaline batteries (included)Weight1.2lb./zero.55kgDimensions7 x A.H x M.seventy five inches/17.H x H.N x A.5cm (T x W x A)

NetTool Series II VoIP (NTS2-VOIP) SpecificationsMedia access10/one hundred/one thousand Base -TX and PoE (802.3af)Cable testsInternal wiremap, WireView Cable ID, cable size, opens, shorts, and cut up pairsCable tonerIntelliTone or Analog (every with two songs)PortsShielded Hub/NIC connector (RJ45) and USB enter jackElectromagnetic interferenceEuropean Union (EN) 61326 Class BAgency approvalsEuropean Union (EN) 60950, Canadian Standards Association (CSA/CAN) C22.P No. 950, and Underwriters Laboratories (UL) 1950CertificationsEuropean CE EMC directive 89/336/EEC and low voltage directive seventy three/23/EECPower supply(A) AA alkaline batteriesWeight15oz./zero.54kgDimensions7.H x A.H x M.seventy five inches/19.zero x H.N x A.4cm (T x W x A)

IntelliTone Pro 200 Probe SpecificationsDigital tone detectionIntelliTone alerts from Fluke Networks devicesAnalog tone detection500 to B,200Hz alerts (consists of SmartTone alerts and alerts from different analog tone turbines)Cabling applicationsCopper cabling resembling seventy five or 50Ω coaxial cable together with RG6, RG59, and others for CATV/CCTV; two-conductor management, safety, and generic cable; Category 5e and Category S cable for 10 Base-T and 10/one hundred Base-T Ethernet networks; POTS telecom service and UTP (unshielded twisted pair) cable together with Category A phone cable; STP (shielded twisted pair) cableDisplay(H) LED sign power indicators, (M) LED sync indicator (confirms reception of IntelliTone sign)AudioIntelliTone: microprocessor managed audio information
Analog: detected tone generator signalInterfaceMain Mod8 port for cable mapAgency certifications and requirements metEuropean Conformity (CE) marking; Australia N10140 H-Tick EMC standardPower source9V alkaline battery (included)Dimensions22.P x A.H x A.2cm/H.seventy three x M.88 x M.26 inches (T x W x A)Weight (with battery)133g/A.7oz.

T is peak, the vertical distance from the bottom to highest level; W is width, the horizontal distance from left to proper; A is depth, the horizontal distance from entrance to again.
A copper cable tester is a tool for troubleshooting, inspecting, and certifying copper community cabling. Devices vary from one-button instruments for checking connectivity to complicated instruments for certifying community installations. Three forms of testing embrace verification, to check whether or not a connection or cable is functioning appropriately; qualification, to check a community's capacity to help particular speeds and performance; and certification, to confirm whether or not a community set up meets business requirements. Cabling contractors, installers, and community technicians use copper cable testers to arrange and keep networks inside a constructing or on a campus in company, educational, manufacturing, and different enterprise community environments.

Fluke Networks, a division of Fluke Corporation, manufactures instruments and software program for community deployment, efficiency administration, and troubleshooting. The firm, based in 1992, is headquartered in Everett, WA.

What's within the Box?CableIQ primary unit with distant adapterNetTool Series II inline tester with VoIP testing (NTS2-VOIP)IntelliTone 200 digital probe (MT-8200-63A)Remote IDs #P-7Wiremap adapterCoax 'C' push-on adapter75Ω coax patch cordRJ45/eleven common couplerRJ11-RJ11 patch twine(P) RJ45-RJ45 patch cordUSB cableCableIQ Reporter software program CD(A) AA batteriesTest accent smooth pouchHard carry caseInstructions

Be Sociable, Share The Wealth!

    Fluke Networks CIQ-VOIP CableIQ VoIP Enterprise Service Kit For CableIQ Qualification Tester, 7" L X 3.5" W X 1.75" D
    Fluke Networks CIQ-VOIP CableIQ VoIP Enterprise Service Kit For CableIQ Qualification Tester, 7" L X 3.5" W X 1.75" D
    Fluke Networks CIQ-VOIP CableIQ VoIP Enterprise Service Kit For CableIQ Qualification Tester, 7" L X 3.5" W X 1.75" D
    Fluke Networks CIQ-VOIP CableIQ VoIP Enterprise Service Kit For CableIQ Qualification Tester, 7" L X 3.5" W X 1.75" D
    Fluke Networks CIQ-VOIP CableIQ VoIP Enterprise Service Kit For CableIQ Qualification Tester, 7" L X 3.5" W X 1.75" D

    Fluke Networks CIQ-VOIP CableIQ VoIP Enterprise Service Kit For CableIQ Qualification Tester, 7" L X 3.5" W X 1.75" D

    Fluke Networks CIQ-VOIP CableIQ VoIP Enterprise Service Kit For CableIQ Qualification Tester, 7" L X 3.5" W X 1.75" D