Fluke Networks CIQ-GSV2 CableIQ Qualification Tester Kit

Rating: 
Amazon Price: $2,755.00 (as of June 5, 2017 6:03 am – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on the Amazon site at the time of purchase will apply to the purchase of this product.

The Fluke Networks CableIQ Qualification Service Kit offers community service technicians with the capabilities to qualify cabling efficiency and ensure community connectivity, and consists of instruments for expediting drawback decision, performing excessive-high quality strikes, modifications, additions, and upgrades. The CableIQ service package consists of the CableIQ qualification tester, the LinkRunner AT one thousand verification tester, IntelliTone Pro 200 probe, six CableIQ distant identifiers, software program, and a carrying case. The CableIQ qualification tester qualifies cabling bandwidth, together with voice, 10/one hundred/one thousand Ethernet, VoIP, and CATV, and locates efficiency faults. It identifies wiremap faults, bridge faucets, and port traits; detects and shows the power of RF coaxial tv alerts; and mechanically studies whether or not the cable is related to a tool. A wiremap perform helps as much as seven distinctive ID numbers and might be carried out to confirm that cables are put in appropriately. The MultiMap perform exams a number of segments via bridge faucets to detect faults on particular person conductors. The tester detects and locates crosstalk and impedance faults. The continuity toner exams safety switches at door and home windows and the speaker check verifies speaker connections. The tester blinks the port mild on a hub or change to confirm connectivity and cable routing. The constructed-in toner perform works with normal analog probes to find and isolate cables behind partitions, at patch panels, or in bundles. The IntelliTone perform works with optionally available Fluke Networks ITK100 and ITK200 probes. The meter shops as much as 250 units of check outcomes. Results could be downloaded to a pc for lengthy-time period data retention, or imported to the CableIQ Reporter software program for evaluation and era of certification studies to offer proof that the set up has been accomplished in accordance with requirements and greatest practices (software program and USB cable included). Copper and fiber testers are utilized by community technicians to troubleshoot, keep, and optimize efficiency of copper and fiber optic cabling, hardware connections, and community settings in enterprise networks.

The LinkRunner AT one thousand is a transportable troubleshooting system for analyzing and testing Ethernet networks over copper cable infrastructure. It shops and performs automated connectivity exams to assist determine and analyze community issues. The system analyzes copper cabling infrastructure, verifies connections at 10M/100M/1G, and discovers VLAN ports and switches to assist determine potential points. It measures the supply and responsiveness of community providers, together with DHCP and DNS, to diagnose and clear up complicated points. It helps IPv4 addressing for compatibility with location and identification protocols, and supplies 802.1x authentication to confirm entry to safe networks. The LinkRunner AT one thousand has a P.H" LCD display to show check outcomes and a 12-key elastomeric keypad for navigation. This moveable community testing system is appropriate to be used by community technicians to confirm community connectivity in native-space networks corresponding to workplace buildings or faculties.

The IntelliTone Pro 200 probe detects IntelliTone digital alerts, rejecting noise and false alerts, to find and hint knowledge cabling on lively networks. It detects 500 to B,200 Hz analog alerts to isolate particular person wire pairs and hint voice, audio, and video cabling on non-lively networks. The probe detects alerts at cable racks, in patch panels, and even behind partitions, and identifies detected alerts audibly and with eight LEDs that mild successively because the sign power will increase for immediate isolation of a single cable inside a bundle. A sync LED exhibits battery power at energy-up and confirms reception of IntelliTone alerts, and the cable map perform permits the probe to validate the cable map on RJ11 and RJ45 connectors, testing continuity and discovering shorts, opens, and crossed-pair wiring faults on all 4 pairs of UTP and STP twisted pair cabling. RJ11 and RJ45 jacks plug right into a port on the underside of the probe. The probe turns off routinely after one hour of inactivity.

CableIQ SpecificationsQualification auto-tests1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap solely, CoaxTest connectorsShielded H-pin modular jack accepts H-pin modular (RJ45) and A-pin modular (RJ11) plugs; and E-connector for coaxial cableSupported testsWiremap, size, cable sign efficiency, digital toner, analog toner, Ethernet port detection and identification, analog phone detection, blink port mild, continuity, speaker check, cable fault discovering, and video sign detectionLength testUp to one thousand'/300mWiremapDetect single-wire faults and helps MultiMap mode with as much as seven distant workplace identifiers; attracts proportional wire size to breaks; and detects cut up pairsTone generatorGenerates digital tones suitable with Fluke Networks IntelliTone probe and 4 tones suitable with typical analog probes (all pairs, frequency M-P kHz)Find faultMeasures crosstalk and impedance and compares towards applicable limits based mostly on qualification check chosen. Detects location of huge level sources in addition to distributed sources within the cabling if they’re enough to disqualify the appliance.Results storageUp to 250 qualification check resultsComputer interface for knowledge exportUSB port (H-pin mini-C)Power sourceFour AA alkaline batteries (included)Weight1.2lb./zero.55kgDimensions7 x O.H x M.seventy five inches/17.H x H.N x A.5cm (T x W x A)

LinkRunner AT one thousand SpecificationsCopper media accessRJ-forty five: 10BASE-T, 100BASE-TX, 1000BASE-T, and PoE (IEEE 802.3af and 802.3at); 100BASE FX and 1000Cable testsPair lengths, opens, shorts, splits, crossed, straight via, and cable IDNetwork providers testsDHCP, DNS, TCP, ICMPPorts(M) RJ45 10/one hundred/1000BASE-T Ethernet, (M) Small Form-Factor Pluggable (SFP) 100BASE-FX/1000BASE-X EthernetReportsUp to 10Display2.H" colour LCD (320 x 240 pixels)Keypad12-key elastomericData outputUSB H-pin mini-BCertifications and complianceEuropean Conformity (CE) marking, Australia N10140, Canadian Standards Association (CSA)Weight18oz./zero.5kgDimensions7.H x A.H x B.N inches / 19.H x H.N x A.H cm (T x W x A)

IntelliTone Pro 200 Probe SpecificationsDigital tone detectionIntelliTone alerts from Fluke Networks devicesAnalog tone detection500 to M,200Hz alerts (consists of SmartTone alerts and alerts from different analog tone turbines)Cabling applicationsCopper cabling resembling seventy five or 50Ω coaxial cable together with RG6, RG59, and others for CATV/CCTV; two-conductor management, safety, and generic cable; Category 5e and Category S cable for 10 Base-T and 10/one hundred Base-T Ethernet networks; POTS telecom service and UTP (unshielded twisted pair) cable together with Category A phone cable; STP (shielded twisted pair) cableDisplay(H) LED sign power indicators, (M) LED sync indicator (confirms reception of IntelliTone sign)AudioIntelliTone: microprocessor managed audio information
Analog: detected tone generator signalInterfaceMain Mod8 port for cable mapAgency certifications and requirements metEuropean Conformity (CE) marking; Australia N10140 H-Tick EMC standardPower source9V alkaline battery (included)Dimensions22.P x A.H x A.2cm/H.seventy three x M.88 x B.26 inches (T x W x A)Weight (with battery)133g/A.7oz.

T is peak, the vertical distance from the bottom to highest level; W is width, the horizontal distance from left to proper; A is depth, the horizontal distance from entrance to again.
A copper cable tester is a tool for troubleshooting, inspecting, and certifying copper community cabling. Devices vary from one-button instruments for checking connectivity to complicated instruments for certifying community installations. Three forms of testing embrace verification, to check whether or not a connection or cable is functioning appropriately; qualification, to check a community's capability to help particular speeds and performance; and certification, to confirm whether or not a community set up meets business requirements. Cabling contractors, installers, and community technicians use copper cable testers to arrange and keep networks inside a constructing or on a campus in company, educational, manufacturing, and different enterprise community environments.

Fluke Networks, a division of Fluke Corporation, manufactures instruments and software program for community deployment, efficiency administration, and troubleshooting. The firm, based in 1992, is headquartered in Everett, WA.

What's within the Box?CableIQ qualification tester with removable wiremap adapterLinkRunner AT one thousand community testing deviceIntelliTone Pro 200 probeCableIQ distant identifiers #B-7Coax 'E' push-on adapterCoaxial patch twine, C-connector to E-connector, 75Ω, M.8mUniversal adapter, H-pin/A-pin modular jack to8-pin/A-pin modular jack (RJ45/eleven)RJ11-RJ11 patch twine(P) RJ45-RJ45 patch cordsCableIQ Reporter software program CDLinkRunner Manager software program CDUSB cable(H) AA batteries9V alkaline batteryRemovable AA battery caseAC adapterTest accent tender pouchCarrying caseInstructions

Product Details

  • Product Dimensions: 16.7 x 15.8 x 11.1 inches ; 11.8 pounds
  • Shipping Weight: 11.8 pounds
  • Shipping: Currently, item can be shipped only within the U.S.
  • ASIN: B007FR6SL6
  • Item model number: CIQ-GSV2
Be Sociable, Share The Wealth!

    Fluke Networks CIQ-GSV2 CableIQ Qualification Tester Kit
    Fluke Networks CIQ-GSV2 CableIQ Qualification Tester Kit
    Fluke Networks CIQ-GSV2 CableIQ Qualification Tester Kit
    Fluke Networks CIQ-GSV2 CableIQ Qualification Tester Kit
    Fluke Networks CIQ-GSV2 CableIQ Qualification Tester Kit

    Fluke Networks CIQ-GSV2 CableIQ Qualification Tester Kit

    Fluke Networks CIQ-GSV2 CableIQ Qualification Tester Kit